This article shows the utility of M3D with HTS and gives valuable Information to the following topics:
3D cell culture models have shown to provide more predictive outcomes in drug screening, pre-clinical studies, and personalized medicine. Recent technological advances have enabled 3D tissue culture models for high-throughput screening (HTS). “The discovery of new drugs is a monumental struggle with nature." – This quote by renowned chemist Bruce Maryanoff aptly sums up the tedious and expensive drug development process ranging from target identification, lead discovery and optimization, preclinical validation, and clinical trials to approval for clinical use. High-throughput screening (HTS) of compound libraries to identify lead structures is fundamental in the drug development process.
Remarkably, much of cell-based HTS is currently still done with 2D cell culture, though it is known that 2D structures poorly reflect physiological conditions – one reason for the high failure rate in drug discovery. Scientists, therefore, have high hopes for 3D cell culture. Spheroids and organoid models are promising tools for more precise drug screening compared to 2D cultures and animal models [1].
Reproducibility, standardization, miniaturization, scalability, and throughput will push cell culture technologies across the chasm. Magnetic 3D cell culture and bioprinting (M3D) are based on magnetizing cells using a biocompatible nanoparticle assembly NanoShuttle-PL consisting of poly-L-lysine, magnetic iron oxide, and gold nanoparticles that electrostatically adhere to cells [2]. When combined with flat-bottom CellRepellent microplates designed for HTS, magnetized cells can be easily manipulated with magnetic fields [3] to precisely and reproducibly enable:
• Xenogenic-free culture
• HTS with standard laboratory automation
• Scalability - 6- to 1,536-well
• Miniaturization of culture
• Co-culture different cell types
• Positioning of cells for faster imaging
• Use of flat-bottom plates for high-resolution imaging
• Delineation of small imaging area
• Holding cells in place for media exchange or other downstream manipulation
• Use with automated plate washers
• Z' > 0.5 with chemiluminescence assays with 384- and 1,536-well formats
M3D is an innovative tool that can replicate the in vivo phenotypes in vitro, ideal for HTS compound response profiling in a rapid, miniaturized, and cost-effective manner [4].
Virneliz et al. applied magnetic 3D bioprinting (M3D) in the first large-scale screening effort completing HTS on over 150K molecules against primary pancreatic cancer cells. It is the first demonstration that a screening campaign of this magnitude using clinically relevant, ex vivo 3D pancreatic tumor models obtained directly from biopsy can be performed in the same manner as a conventional drug screening using 2D cell models [5].
Hou et al. also describe the utility of 3D magnetic cell culture for large-scale drug screening [6]. The researchers developed an HTS-compatible method to consistently produce organoids in standard 384- and 1536-well flat-bottomed plates by combining the use of a cell-repellent surface with magnetic force bioprinting technology. They validated this method by studying the effect of well-characterized anticancer agents against four patient-derived pancreatic cancer primary cells associated with KRAS mutations. The technology was tested for compatibility with HTS automation by performing a cytotoxicity pilot screening of ~3300 approved drugs [6].
With M3D, magnetic fields can easily and precisely move and position spheroids to speed up imaging, which is ideal for a broad range of automation and HTS applications. Below, we show an example of how magnetic fields can precisely position spheroids at the center of the microwell for faster imaging.
Dots in the microwell are pictures of real spheroids in a flat bottom 384-well CellRepellent microplate. (Left) When using flat bottom plates, needed for high-resolution imaging, thermal motion within the well can move the spheroids of the center of the well (~ 25% well off center), which makes it challenging to acquire images. (Right)
Placing the flat bottom microwell plate on M3D magnetic drive for few seconds prior to imaging can center each spheroid back to the middle wells, allowing more effective and faster imaging.
Next, Magnetic fields can also hold magnetized cultures in place, enabling easy media exchange with plate washers [7] and with more advanced tools like the BlueWasher from BlueCatBio [8].
3D cell cultures can represent different organ models needed for HTS, including the specific phenotype, complex tissue signaling, and cellular interactions. There are several ways to produce 3D cell cultures, which can differ in the amount of manipulation, equipment, and reagents required.
3D bioprinting is one of the newest tissue engineering techniques for the biofabrication and recapitulation of complex biological tissues. In particular, magnetic 3D bioprinting (M3D) is a xenogenic-free, highly scalable, and reproducible 3D cell culture platform [4].
These are the simplest way to produce spheroid-like cultures, and they come with a drawback: It is difficult to consistently control the formation and shape of spheroids created this way. Scalability and manipulation needed for 3D culture maintenance and downstream analysis are a meaningful practical hurdle when using these approaches. Scaffold-free methods include non-adherent surface culture systems, such as round bottom and hanging drop.
Scaffold-based approaches focus on the application of cyto-compatible, natural, or synthetic biomaterials to support cell proliferation, differentiation and function and allow for nutrient and metabolite exchange and desired phenotype. Commercially available natural biomaterials for 3D cell culture like xenogenic hydrogels provide high biocompatibility microenvironment [4] but lack in reproducibility due to batch-to-batch variability and scalability and optical clarity needed for imaging.
M3D enabled HTS is a translational tools that can mimic the tumor microenvironment by recapitulating the complex genetic and molecular compositions of various tissue types. They can capture phenotypes that are predictive of in vivo biology needed to accelerate the identification of drug targets, streamline drug testing, and predict drug response in drug discovery and personalized medicine.
Please fill out this form and contact our experts today to find the perfect solution for you!